SP5000 Multi Display Adapter

Multi Display Adapter Utilities | Flat Panel Monitors | SP5000 Series Display Modules

 

 

Separate installation across long distances with a single LAN cable

Well-adapted to production environments, reliable and easily installed.
 

 

Select Display Mode

Compatible with cloned or extended display mode. Independent monitoring and operation on each panel is possible.
 

 

Exclusive Control of Touch Input

Prevent trouble due to unintended simultaneous operation by multiple users.  



* Use of this exclusive control is limited to a specific host machine.

 

System Configuration
 


* MDA: Multi Display Adapter (Model No. PFXZCDADEXR1)


Electrical Specifications

 

 

Model PFXZCDADEXR1
Power supply Rated input voltage 12Vdc (Supplied by the Display Module)
Power consumption 8W or less

 

 

 

Environmental Specifications

Model PFXZCDADEXR1
Physical environment Surrounding air temperature 0 to 60 °C (32 to 140 °F)
Surrounding air and storage humidity 10 to 90% RH (non-condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree For use in Pollution Degree 2 environment
Corrosive gases Free of corrosive gases
Atmospheric pressure
(operating altitude)
800 to 1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical environment Vibration resistance IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm (0.14 in)
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
Shock resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical environment Noise Immunicty Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic discharge
immunity
Contact discharge method: 6 kV (IEC/EN 61000-4-2 Level 3)

 

Structural Specifications

Model PFXZCDADEXR1
Cooling method Natural air circulation
External dimensions (W x H x D) 188 x 131 x 35 mm(7.4 x 5.16 x 1.38 in.)
Weight 800 g (1.76 lb) or less

In order for stable operations of the system using Multi Display Adapter, we recommend the following operations:

When turning on a power:

  • Turn on the host terminal and each Multi Display Adapter at the same time (using a common power supply).
  • Or, after turning on all Multiple Display Adapters and a standby screen appears, turn on the host terminal.

During operation:

  • Turn on or off Multi Display Adapters and connect or disconnect LAN cables, after turning off the host terminal.