The PanelStation QPM-3D200-B2P 6" programmable operator interface is a cost effective replacement of hard-wired discrete devices, from push buttons and pilot lights to message centers. These units are excellent choice for OEM machinery to share operator runtime information and developing diagnostic machine troubleshooting guidelines.
FEATURES
Data Backup Features
High quality text font display
NEMA#250 TYPE 4X/12 Front Panel
Easy to install compact size
Reliable and most popularly used operator interface
High performance of instant-on and fast screen change operation
Easy screen creation with the Part Library and Extended Drawing functions
Support of over 500 PLC/Controller models around the world
Screen data and communication compatibility with all PanelStation models
Upward Compatibility
Upward compatibility of installation cutout and software with PanelStation QPM models
TECHNICAL SPECIFICATIONS:
Display Type: Monochrome Blue-mode LCD (Blue / White)
Backlight: CCFL
Resolution: 320 x 240 pixels
Nominal Display Area: 115.2W x 86.4H (mm)
Attributes: Blink/Reverse Video
Contrast Control: 8 levels via touch panel
Application Memory: FLASH EPROM 1 MB (holds up to 320 screens, assuming an average screen size of 3.2 KB)
Touch Panel: 16 x 12 keys per screen; 1 or 2 point touch
Serial Interface:
Asynchronous: RS-232C/RS-422
Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, Odd or Even
Transmission Rate: 2400 to 115.2Kbps
Tool Connector: Asynchronous: TTL level non-procedural command (During Development) For screen data transfer(During RUN mode) for Bar-code Reader connection and "pass-through" connection to Mitsubishi PLC programming tool
STANDARDS & RATINGS
Equivalent to IP65f (JEM 1030) and NEMA#250 TYPE 4X/12 (front face of the GP)
COMPLIANCE
UL Recognized, CE, CSA
DIMENSIONS
W207mm [8.15in] x H157mm [6.18in] x D58mm [2.28in] (main unit only)
Weight: 1.1kg [2.4lb] or less (main unit only)
HOW TO ORDER
QPM-3D200-B2P: 6" Blue Mode LCD, 1 Serial port, 1MB memory 24VDC, UL1950, CE
