|
Xycom Automation's newest generation of industrial PCs is designed and tested for the tough environments required for plant floor use. Our standard PC configurations meet the strict specifications required for use in hazardous locations and Europe's CE mark. Based on CPU boards designed specifically for industrial automation, these systems provide the capabilities required by demanding applications. With an installed base of over 200,000 systems, our industrial PC products are successfully applied in manufacturing and process environments world-wide.
Easy-to-Read DisplayThe 3712KPM units utilize a bright TFT 12.0" LCD flat panel display. Complex operations and screens can be displayed with clarity. XGA (1024 x 768) resolution is recommended. However, the 3712KPM units will display SXGA (1280 x 1024) resolution with some clarity degradation. The AGP graphics defaults to 4MB video RAM and will automatically share RAM (up to 32 MB) with the system to allow full 32-bit color depth.
Higher PerformanceWith up to 1.26GHz Pentium III processors available, the 1507 can drive the most demanding applications. The 1507 ships standard with a 1.0GHz Pentium III, with 256K Cache. Optionally a Pentium III 1.26GHz with 512K cache is available. Both processors run at 133 MHz front-side bus.
Fits Your NeedsThe 3712KPM units can be configured many different ways. With four available expansion slots (three full-length ISA/PCI, one ½-length PCI), many cost effective, industry standard options are easily integrated. The optional dual hard drive, externally accessible Compact Flash, or external drive bay connector provide the storage solution you require. Additionally, the CD-ROM can be upgraded to a read/write drive so that even more storage and/or backup options are available.
Meets High StandardsTo survive on the plant floor, the 3712KPM units meet NEMA 4/4x/12, IP65, FCC, UL, cUL, and European CE mark requirements for industrial automation equipment. Xycom Automation leads the industry in reliability, service, and support with an optional five year warranty available.
|
 |
FEATURES
|
Serviceability
The 3712KPM CPU section easily removes from the front panel and display unit without having to detach the front panel from the NEMA enclosure. One electrical connection is used to attach the entire front panel to the rear CPU section. The rear CPU section can be replaced with another very quickly. With the cover removed expansion cards are easily installed without cumbersome cables to contend with.
|
|
Easily Replaceable Hard Drive
The 3712KPM units have incorporated an easy access hard drive mount. Simply remove 2 screws and extract the hard drive. Remove the metal bracket and retention spring, attach it to the new hard drive and install your replacement.
|
|
Secondary Drive Options
The 3712KPM units have several options for the secondary IDE port on the CPU. The hard drive can be replaced with a dual hard drive unit. If solid state storage media is desired then an externally accessible Type I or Type II CompactFlash option is available.
|
|
ADDITIONAL FEATURES
- 12.1" SVGA TFT color flat panel
- Choice of operator input options:
- Reprogrammable keypad with integrated mouse, or
- Combination of keypad, mouse & analog resistive touchscreen
- Intel® Pentium® III options up to 1.26GHz
- Up to 512 MB DRAM
- 10/100 Base T Ethernet port
- RS-232 port
- RS-232 or RS-485 port
- Parallel port
- PS/2 ports (front and rear accessible)
- USB (1.1) ports (front and rear accessible)
- VGA port (supports simultaneous display with additional monitor)
- Four available expansion slots:
- Three full-length (1 PCI, 1 ISA, and 1 either ISA or PCI)
- One ½-length PCI
- DiskOnChip 2000 socket
- CD-ROM and Floppy with optional CD-R/W upgrade
- Easily removable 20 GB hard drive
- Secondary IDE Drive options (choice of one):
- Dual hard drives
- Externally accessible CompactFlash options up to 512MB
- UL 508 Listed
- NEMA 4/4x/12 and IP65 front panels UL listed for hazardous locations: Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F and G
- Pre-loaded with MS-DOS®, Windows® NT, Windows® 2000 (with multilanguage support), or Windows® XP
Important Notice for Windows® XP configurations: Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsoft's privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of this computer, or may be completed by Internet or telephone (toll charges may apply).
|
|
|
|
